Skin – PCGI / PCGI (GPSP) , PPGI / PPGI & SS / SS
(Can be any two combination)
Structural frame work – GI
Thickness of Sheet – 0.5, 0.6 & 0.8 mm
Thickness of Powder Coating – 60-80 microns,
Thickness of Pre coating – 30-35 microns
Insulation – PUF density 40±2 kg/m3, PIR density 48±2
kg/m3
ROCKWOOL density 96 kg/m3 & 144 kg/m3
Sealant – Food grade silicon on both sides of the panels.
Gap should not be more than 4 mm.
Dimensions – Width – 1200 mm or as per room layout.
Height – As per Layout
Panel thickness – 35, 50, 80, 100 mm
Support – Powder coated Base runners with self
supported panels with interconnecting profile.
Color – RAL 9002 std. color & any other color can be
provided from RAL chart.
Panel type – Progressive & Non progressive.

Technical description – Walk on / Non walk on ceiling
panel made out of powder coating GI /Pre painted GI &
stainless steel sheets on both side and inside filled with
infill of specified thickness along with peripheral G.I.
profile. panels will be in the form of planks of 1200 mm
width and length as per the drawing
Skin – PCGI / PCGI (GPSP), PPGI/PPGI & Stainless
steel.
Structural frame work – GI & Thickness of Sheet – 0.5,
0.6 & 0.8 mm
Thickness of Powder Coating – 60-80 micron, Thickness
of Pre coating – 30-35 microns
Insulation – PUF density 40±2 kg/m3, PIR density 48±2
kg/m3
ROCKWOOL density 96 kg/m3 to 144 kg/m3
Sealant – Food grade silicon on both sides of the panels.
Gap should not be more than 4 mm.
Dimensions – Width – 1200 mm & Height – as per layout
Panel thickness – 35 mm, 50 mm, 80 mm & 100 mm
Thick
Load carrying capacity – 75 to 250 kg per sqmtr.
Support – Wall panels and suspension rods.
Color – RAL 9002 std color & any other color can be provided from RAL chart.
Panel type – Progressive & Non progressive.
Cutout provision for HVAC & Electrical – Cutout can be provided with C type flashing.
Hanging arrangement – Panel will be hang with suspension rod, with adjustable turnbuckle &
will be anchor fastened in slab

Technical description – Flush riser duct panels with long projecting neck for connection with
flange for HVAC duct connection. (With
10micron filter) Inclusive of removable
perforated grill fixed at 150 or 200 mm above
Ceiling in riser panel with dome bolt
arrangement (Sizes as per BOQ) & inbuilt
dampers.
Skin – PPGI/PPGI & SS/SS.
Structural frame work & Internal stiffeners –
GI
Thickness of Sheet – 0.8 mm
Thickness of powder coating – 60-80 micron,
Pre coating – 30-35 microns
Riser thickness – 80 mm , 100 mm & 150 mm
Thick
Extension on top – 150 to 200 mm.
Grills type & MOC – Capsule perforated with
dome bolt / magnet / wing bolt fixing &
SS/Power coatings. Grill thickness – 1.2mm
thk.
Dampers – Extruded aluminum coated low leakage volume control damper with bottom
& top operated arrangement.
Pre-filters – Box type filter of 10 microns(G4) 20mm thick, MOC – synthetic non woven
media with Extruded aluminum frame, efficiency – as per EN 779 down to 10 microns,
pressure drop across filter – 4 mm Wg & allowable pressure drop – 10 mm wg.

Technical description – Supply and
Installation of double glass 6mm thick view
panel flush from both side of wall fixed with
both side adhesive tape over GI frame width
to match wall thickness with silica gel
desiccant arrangement and made air tight
with sealant.
Material of construction – Extruded
aluminum profiles & Powder coated GI.
Dimension – view panel glass size – depends
on size of each view panels.
Dimension – view panel glass size – depends
on size of each view panels.
Dimension – view panel glass size – depends
on size of each view panels.
Tape – Both side adhesive or 3M tape.
Silicone – All four side will be filled with
sealants to maintain uniformity.
Desiccant material – Silica gel provided
inside the provide to absorb moisture.
Type – Single glass/both side glass, break
open panels, civil windows & full glass panels.

Description – Double skin door with or without
view panels, with the construction same as
modular panels assembled with the door profile.
Material of construction – GPSP GI Sheet (0.8
mm thick)& Frame (1.2 mm thick) & for fire
rating doors GPSP GI Sheet (1.2 mm thick) &
Frame (1.6 mm thick).
Shutter – 42 / 44 / 46 mm thick
Paint / Finish used – Powder coated & Stainless
steel.
Thickness of Powder Coating – 60-80micron
Sizes – Thickness – 50mm, 80mm ,100mm &
150mm Frame Thickness.
Width 750, 900,1000,1200,1500,1800,2000,2200
mm
Width 750, 900,1000,1200,1500,1800,2000,2200
mm
Door Accessories – Stainless steel hinges 3-4 nos.
per door, Stainless Steel ‘D’ type handles on pull
side of 20 mm dia. with 300 mm long, Stainless steel push plate on push side size
125 x 300 mm, Dorma make door closure std arm (TS-68), both side key operated
locking arrangement, automatic door bottom seal at the bottom, view panel with
6 mm thick safety glass, panic bar for emergency door, flush tower bolt in double
door, stainless steel kick plate of 300 mm height & door interlocking provision.
Filler material – PUF 40±2 kg/m3 /PIR 48±2 kg/m3 /ROCKWOOL 96±2 kg/m3.